This cable is not CA-42 at all. It may be non-original F-Bus cable either a cable with AT-Commands support. You can try it out with Oxygen Phone Manager II ( http://www.opm-2.com/ ) or Oxygen Express ( http://www.oxygen-express.com/ ). We support F-Bus (full duplex) cables ad 'DAU-9p/F-Bus' connection type (in 'Tools' -> 'Options' -> 'Connection and common' ). And AT-commands cables as 'DLR-3/DLR-3p' . Don't set 'DKU-5/CA-42' option for non-original cables- it won't work. You should set virtual COM port directly via 'Tools' -> 'Options' -> 'Connection and common' -> 'Add port'.

--
With best regards. Maxim Vyalkov
Oxygen Software- Tools for your mobile phone.
Oxygen Phone Manager - Migrate, edit and sync your mobile information.
Oxygen Forensic - Premium Mobile Investigation.
maxv@opm-2.com
http://www.oxygensoftware.com
"robi.z [correggere antispam !! x=i]" <robx.z@katamail.com> ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ × ÎÏ×ÏÓÔÑÈ ÓÌÅÄÕÀÝÅÅ: news:474d86bc$0$37195$4fafbaef@reader3.news.tin.it ...

> Hi all,
> anyone here with a not genuine cable adapter
> CA-42 with chip Kingsun/Dazzle ?
>
> Already tested
> Nokia pc suite,
> TI TUSB3410 (fake ca-42 and his driver)
> and Prolific PL2303 (another common fake ca-42) drivers.
>
> Drivers are not for my usb/serial adapter.
> Vid and Pid are 07d0:0410
> (cheched with hardware -> device manager
> usb serial adapter, properties),
> so I'm searching for someone with drivers for this CA
> "kingsun/dazzle" manufacturer or manufacturer home site
> to try contact someone.
>
> References:
> http://www.howardforums.com/archive/topic/830463-1.html
> http://www.qbik.ch/usb/devices/searc...?pattern=ca-42
> ( in this page 07d0:4101 instead of 4110, may be a typo)
> and
> http://www.linux-usb.org/usb.ids
>
> Mobile phone is 6101, but that's not important because
> I have to create the virtual COM before connecting it.
>
> *Antispam* : replace "x" with "i".
> Thanks in advance.
>
> --
> rz
>
>